docs(trmnl): note the expected Google drops from the renderer's Chromium

About 43k POLICY_DENIED a day from trmnl-renderer to Google update and account hosts. Source (OCI label): usetrmnl/trmnl-home-assistant dd556e6; the Chromium flags are a fixed list in screenshot.ts:78 with no env or option override, and --disable-background-networking is not among them. Nothing on our side can switch it off; the denies are correct. S28-4 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Merge pull request 'fix(mdns-relay): turn off RA on net1 so the IPv6 forward uses eth0' (#1598 ) from fix/mdns-relay-no-ra into main
2026-11-07 21:00:44 +01:00 · 2026-11-07 19:43:47 +00:00 · 2026-11-07 20:41:46 +01:00 · 2026-11-07 19:29:05 +00:00 · 2026-11-07 20:28:18 +01:00 · 2026-11-07 20:25:25 +01:00
51 changed files with 583 additions and 1129 deletions
@@ -1,13 +1,17 @@
 # edge-host — bare-metal Arch thin client (replaces the k8s-edge Talos VM)

 Runs the hardware-bound services that used to be pinned to the `k8s-edge`
-Talos node (opentofu `vm_153_k8s_edge.tf`), plus the new CAN bridge:
+Talos node (opentofu `vm_153_k8s_edge.tf`):

 | Service | How it runs | Hardware | Talks to |
 |---|---|---|---|
 | zwave-js-ui | docker compose | ZWA-2 Z-Wave USB radio | HA `zwave_js` via ws://:3000, UI :8091 |
 | sml2mqtt | docker compose | FTDI FT230X meter reader | Mosquitto (`sml2mqtt` user) |
-| open3e | venv + systemd | Innomaker USB2CAN (gs_usb) | Mosquitto (`open3e` user) |
+
+The Viessmann E3 CAN bus is not read by an edge host: the ESP32 gateway
+`vitocal-can` (open3e-esp32) at the Vitocal publishes `open3e/#` directly to
+the cluster broker. `plays/install-edge-host.yml` removes the former
+heating-can stack and the can0 configuration from edge hosts.

 Everything else that once lived on k8s-edge (HA core, matter-server, OTBR,
 music-assistant) already moved to the general node pool and stays in the
@@ -19,10 +23,6 @@ The deployed unit is a **Dell Wyse 3040** (Atom x5-Z8350, 2 GB RAM) on a
 flash-wear handling that hardware implies. The installer also supports an
 N100/NVMe box; it autodetects the target disk, so either works.

-Rationale for leaving Kubernetes for the CAN part: the stock Talos kernel
-ships with `CONFIG_CAN` unset (siderolabs/talos#7686), so SocketCAN cannot
-work in any pod without a custom kernel image per Talos release.
-
 ## Base install (once, from the edge-host installer ISO)

 Build and boot the dedicated installer image — see
@@ -58,24 +58,18 @@ inventory change.

 | device | group | playbook |
 |---|---|---|
-| Innomaker USB2CAN (Vitocal/VX3 + E380) | `heating_can` | `plays/install-heating-can.yml` |
 | Nabu Casa ZWA-2 Z-Wave radio | `zwave_gateway` | `plays/install-zwave-gateway.yml` |

-Add the host to the matching group, then run that playbook. They depend on
-the base play having run: all three need the local MQTT bridge, and two of
-them need docker.
+Add the host to the matching group, then run that playbook. It depends on
+the base play having run: it needs docker.

-A host with nothing attached is simply absent from all three groups and needs
+A host with nothing attached is simply absent from these groups and needs
 none of these commands.

 ## Secrets (before first play run)

 Create `inventory/group_vars/edge_host/vault.yml` with ansible-vault. The
-cluster broker has no `open3e` user: edge-1 logs in only as the register
-account `edge-1` (see "MQTT bridge" below), so
-`vault_edge_open3e_mqtt_password` reaches only the loopback broker, which
-allows anonymous clients; any random value works (`openssl rand -hex 24`).
-The zwave-js value comes out of the cluster:
+zwave-js value comes out of the cluster:

 ```
 # zwave-js session secret
@@ -84,7 +78,6 @@ kubectl -n home-assistant get secret zwave-js-session -o jsonpath='{.data.sessio

 ```yaml
 # vault.yml
-vault_edge_open3e_mqtt_password: "..."
 vault_edge_zwavejs_session_secret: "..."
 vault_edge_loki_password: "..."   # dedicated edge-1 Loki push cred (see "Logging & eMMC")
 ```
@@ -102,9 +95,6 @@ The Z-Wave network keys do NOT need separate handling — they live in

 Preparation:
 - [ ] `vault.yml` populated (above), play runs green against edge-1
- [ ] CAN: Innomaker adapter connected to the VX3 external CAN port,
-      `ip -details link show can0` shows `state ERROR-ACTIVE bitrate 250000`,
-      `candump can0 -n 5` shows frames

 zwave-js (order matters — never two servers on one radio):
 - [ ] Copy the store out of the PVC while the pod still runs:
@@ -122,11 +112,6 @@ sml2mqtt:
      port, Wh stays Wh) → remove sml2mqtt from the home-assistant
      kustomization in the follow-up PR

-open3e:
- [ ] Stop any workstation listener (ONE instance per bus, hard rule)
- [ ] Move the USB2CAN adapter, `systemctl start open3e`
- [ ] Topics under `open3e/#` update on the broker
-
 Afterwards:
 - [ ] Retire VM 153: remove `vm_153_k8s_edge.tf`, `talos/patches/k8s-edge.yaml`,
      node from the cluster (`kubectl delete node k8s-edge`, tofu apply)
@@ -141,17 +126,6 @@ Afterwards:
  mesh-connected workstation. The play reads the image's Alpine release
  itself and rebuilds the preloaded `.so` when it changes (see
  "Logging & eMMC" → zwave-js).
- open3e / E3onCAN updates: both are pinned to commits in
-  `roles/heating-can/defaults/main.yml`, so re-running the play does NOT pick
-  up upstream changes -- that is deliberate, these drive the heat pump. The
-  weekly update-audit reports when either falls behind (see
-  `ci/agents/update-audit/prompt.md`); bump the pin and re-run.
-  Pinning to a tag is not an option for open3e: it publishes none.
- Ad-hoc CAN scans: `systemctl stop open3e` first (single-instance rule),
-  restart afterwards.
- can-utils (`candump`) is AUR-only on Arch — install manually via
-  `pamac build can-utils` if needed for debugging; the role deliberately
-  doesn't manage AUR packages.

 ## Logging & eMMC

@@ -164,7 +138,9 @@ role keeps logs off local flash and monitors wear:
 - **Docker logs to journald** (`docker-daemon.json`, `log-driver: journald`)
  instead of unbounded json files under `/var/lib/docker/containers`. Both
  compose services inherit it; `docker logs` still works.
- **Grafana Alloy ships the journal to Loki** (`edge-alloy.service`). Its
+- **Grafana Alloy ships the journal to Loki** (`edge-alloy.service`, which
+  runs the upstream `grafana/alloy` image with `/run/log/journal` mounted
+  read-only; Arch's `grafana-alloy` package has no `loki.source.journal`). Its
  WAL/positions sit on `/run/alloy` (tmpfs), so the agent writes nothing to
  the eMMC either. Net effect: no log writes hit local flash — the trade-off
  is that logs are RAM-only and lost on reboot unless already shipped.
@@ -213,47 +189,3 @@ journal commit).
 - Verify the drop with the eMMC-write sampling described above; roll back by
  removing the `LD_PRELOAD` env + `.so` mount from the compose file.

-## MQTT bridge (TLS to the cluster broker)
-
-open3e, e3oncan and sml2mqtt do **not** publish to the cluster broker directly.
-They connect to a **local mosquitto on loopback** (`127.0.0.1:1883`,
-`edge_mqtt_host`), which **bridges to the cluster broker over TLS**
-(`mqtt.renner.uno:8883`). Two reasons:
-
- **Security:** open3e and e3oncan have no native MQTTS support (their MQTT
-  code does a plain `connect()`), so they can't use the broker's 8883 TLS
-  listener. Terminating TLS in the local broker keeps their plaintext MQTT on
-  loopback only — off the untrusted IoT VLAN — while the actual network hop is
-  encrypted. The public Let's Encrypt cert is validated against the system CA
-  bundle (`edge_mqtt_bridge_cafile`); no cert distribution needed.
- **Availability:** the local broker buffers telemetry (in RAM) if the cluster
-  broker is briefly unreachable, and flushes on reconnect — edge-1 no longer
-  hard-depends on cluster/network uptime for every publish.
-
-The local broker is `allow_anonymous` on loopback — the trust boundary is the
-host; nothing off-host can reach it.
-
-**Bridge credential (REN-1307).** One bridge `connection` logs in as the
-register account `edge-1` (`kubernetes/apps/home-assistant/mqtt-accounts.yaml`)
-and carries `open3e/#` out and `open3e/cmnd` back. The cluster broker does not
-accept the vault-password bridges in `bridge.d/legacy.conf`, which exists only
-until the first push. Its password is pushed
-by mqtt-account-controller to `edge-mqtt-cred` (`:8443`, the controller's
-esp32 API over HTTPS). That endpoint accepts only a client certificate from
-the MQTT CA with CN `mqtt-account-controller`; edge-1 holds the public CA and
-its own server key, nothing else. On a push it writes
-`/etc/mosquitto/bridge.d/edge-1.conf`, deletes `bridge.d/legacy.conf` and
-restarts the local mosquitto. The controller sets a new password whenever the
-bridge reports "not connected" (also after a reinstall), so no play run is
-needed for a rotation. Diagnosis: `journalctl -u
-edge-mqtt-cred`, and `mosquitto_sub -t '$SYS/broker/connection/edge-1/state'`
-(retained `1` = connected).
-
-**eMMC:** the local broker writes **nothing** to flash — `persistence false`
-(retained/queued messages in RAM) and `log_dest stdout` (to the volatile
-journal → Loki). Do not add persistence or log-file settings to
-`edge-mqtt-bridge.conf.j2`.
-
-Rollback: point `edge_mqtt_host` back to `mqtt.renner.uno` and re-run (clients
-reconnect directly on 1883). Config: `edge-mqtt-bridge.conf.j2` →
-`/etc/mosquitto/mosquitto.conf`.
@@ -2,7 +2,6 @@
 # Secret indirection — real values live in vault.yml (ansible-vault) next
 # to this file; see docs/edge-host.md for how to populate it from
 # the cluster secrets.
-edge_open3e_mqtt_password: "{{ vault_edge_open3e_mqtt_password }}"
 edge_zwavejs_session_secret: "{{ vault_edge_zwavejs_session_secret }}"
 # Loki push credential (dedicated 'edge-1' user, Traefik basic-auth on the
 # loki.renner.uno ingress; the matching htpasswd line lives in the cluster
@@ -36,25 +35,8 @@ keepalived_ntp_sysctl:
 # Realtek NIC on the Wyse 3040 has no hardware timestamping.
 chrony_hwtimestamp: false

-# --- Local MQTT contract -------------------------------------------------
-# Shared between the broker and its clients, so it belongs to the inventory
-# rather than to either side's role. mqtt-bridge listens here; heating-can
-# publishes here; and the bridge authenticates to the cluster
-# broker AS the open3e user, so it needs that identity too.
-#
-# Keeping these in one role's defaults only worked while a single play loaded
-# every role at once. Splitting the plays by capability exposed it: the bridge
-# could not render without a heating-can default, and the CAN services could
-# not render without an mqtt-bridge default.
-edge_mqtt_host: 127.0.0.1
-edge_mqtt_port: 1883
-edge_open3e_mqtt_user: open3e
-edge_open3e_mqtt_topic: open3e
-
 # Units claude-bot may restart (ssh-ca role); the containers go through docker.
 ssh_ca_claude_sudo_units:
-  - mosquitto
-  - edge-mqtt-cred
  - edge-alloy
  - keepalived
  - chronyd
@@ -18,8 +18,8 @@ proxy-1.renner.uno ansible_host=proxy-1.nb.renner.uno ansible_user=root
 proxy-2.renner.uno ansible_host=proxy-2.nb.renner.uno ansible_user=root

 # Every bare-metal edge thin client. Gets the host-generic roles only:
-# flash-wear handling, the log shipper, the MQTT bridge, the VLAN
-# sub-interface. Nothing here assumes any peripheral is attached.
+# flash-wear handling, the log shipper, the VLAN sub-interface. Nothing here
+# assumes any peripheral is attached.
 [edge_host]
 edge-1.iot.renner.uno ansible_user=root
 edge-2.iot.renner.uno ansible_user=root
@@ -37,32 +37,18 @@ nas-2.renner.uno ansible_user=root
 # These are children of [edge_host], declared below: a peripheral is added to an
 # edge client, it does not replace the base. Making that a :children relation
 # rather than a comment means a host added only to a capability group still
-# resolves group_vars/edge_host -- where the local MQTT contract lives -- so it
-# cannot silently come up without edge_mqtt_host and friends.
+# resolves group_vars/edge_host.
 [zwave_gateway]
 edge-1.iot.renner.uno

-[heating_can]
-edge-1.iot.renner.uno
-
 [edge_host:children]
 zwave_gateway
-heating_can

-# NTP servers. edge-1 was added here so the role would survive the PVE hosts
-# being retired for bare-metal Talos, which cannot run chrony or keepalived
-# itself. That retirement has now happened, so edge-1 is the ONLY member.
-#
-# THIS IS NO LONGER HIGHLY AVAILABLE. The group was jupiter (MASTER, prio 100),
-# saturn (90), neptune (80) and edge-1 (BACKUP, 70); the first three are gone.
-# A single VRRP member takes the address regardless of its configured state, so
-# the service address is still served, but by one thin client with
-# no failover behind it. install-ntp-ha.yml still carries the four-host
-# ntp_servers priority map, which now describes hosts that do not exist.
-#
-# Restoring redundancy needs a second chrony host that is not a Talos node.
-# See plays/install-ntp-ha.yml for why keepalived is scoped more narrowly than
-# chrony within this group.
+# NTP servers: every edge host (edge-1 BACKUP prio 70, edge-2 BACKUP prio 60;
+# see the ntp_servers map in plays/install-ntp-ha.yml). Talos nodes cannot run
+# chrony or keepalived. The jupiter/saturn/neptune entries in that map
+# describe retired PVE hosts. See plays/install-ntp-ha.yml for why keepalived
+# is scoped more narrowly than chrony within this group.
 [ntp_cluster:children]
 edge_host

@@ -1,70 +0,0 @@
---
-# Configure VMs to use host time sync via kvm-clock
-# Disables systemd-timesyncd to prevent NTP conflicts
-#
-# VMs get time from Proxmox host via kvm-clock paravirtualized clock
-# This is more accurate and reliable than network NTP for VMs
-
- name: Configure VM time synchronization from host
-  hosts: all
-  become: yes
-  gather_facts: yes
-
-  tasks:
-    - name: Check if running as VM (not LXC)
-      stat:
-        path: /sys/devices/system/clocksource/clocksource0/current_clocksource
-      register: clocksource_file
-
-    - name: Get current clock source
-      slurp:
-        src: /sys/devices/system/clocksource/clocksource0/current_clocksource
-      register: clocksource
-      when: clocksource_file.stat.exists
-
-    - name: Display clock source
-      debug:
-        msg: "Clock source: {{ (clocksource.content | b64decode | trim) if clocksource_file.stat.exists else 'N/A (LXC)' }}"
-
-    - name: Check if systemd-timesyncd is installed
-      command: systemctl list-unit-files systemd-timesyncd.service
-      register: timesyncd_installed
-      check_mode: false
-      failed_when: false
-      changed_when: false
-
-    - name: Stop and disable systemd-timesyncd on VMs using kvm-clock
-      systemd:
-        name: systemd-timesyncd
-        state: stopped
-        enabled: no
-      when:
-        - clocksource_file.stat.exists
-        - clocksource.content is defined
-        - "'kvm-clock' in (clocksource.content | b64decode)"
-        - "'systemd-timesyncd.service' in timesyncd_installed.stdout"
-
-    - name: Mask systemd-timesyncd to prevent re-enabling
-      systemd:
-        name: systemd-timesyncd
-        masked: yes
-      when:
-        - clocksource_file.stat.exists
-        - clocksource.content is defined
-        - "'kvm-clock' in (clocksource.content | b64decode)"
-        - "'systemd-timesyncd.service' in timesyncd_installed.stdout"
-
-    - name: Verify time sync status
-      command: timedatectl show --property=NTPSynchronized
-      register: timesync_status
-      check_mode: false
-      changed_when: false
-      failed_when: false
-
-    - name: Display final status
-      debug:
-        msg: |
-          Host: {{ inventory_hostname }}
-          Type: {{ 'VM (kvm-clock)' if (clocksource_file.stat.exists and 'kvm-clock' in (clocksource.content | b64decode | default(''))) else 'LXC/Other' }}
-          Time sync: {{ timesync_status.stdout | default('unknown') }}
-          Note: VMs sync time from Proxmox host, LXCs inherit host time automatically
@@ -8,7 +8,6 @@
 # their own inventory groups:
 #
 #   plays/install-zwave-gateway.yml   [zwave_gateway]   ZWA-2 radio
-#   plays/install-heating-can.yml     [heating_can]     Innomaker USB2CAN
 #
 # Splitting the roles without splitting the plays would have kept the coupling:
 # one play applying every role to one group is the monolith again, a layer up.
@@ -31,11 +30,96 @@
  # do not silently depend on the connection user staying privileged.
  become: true

+  # The Viessmann E3 CAN bus is read by vitocal-can (open3e-esp32 at the
+  # Vitocal), which publishes to the cluster broker itself, not by an edge
+  # host. These remove the former heating-can stack, the can0 configuration
+  # and the open3e MQTT bridge (loopback mosquitto + edge-mqtt-cred); each is
+  # a no-op where they are absent.
+  pre_tasks:
+    - name: Read the service list
+      ansible.builtin.service_facts:
+
+    - name: Stop and disable the retired MQTT bridge services
+      ansible.builtin.systemd:
+        name: "{{ item }}"
+        state: stopped
+        enabled: false
+      loop:
+        - edge-mqtt-cred
+        - mosquitto
+      when: (item ~ '.service') in ansible_facts.services
+
+    - name: Remove the retired MQTT bridge files
+      ansible.builtin.file:
+        path: "{{ item }}"
+        state: absent
+      loop:
+        - /etc/systemd/system/edge-mqtt-cred.service
+        - /usr/local/sbin/edge-mqtt-cred
+        - /etc/edge-mqtt-cred
+        - /etc/mosquitto
+      register: edge_mqtt_bridge_files
+
+    - name: Reload systemd without the edge-mqtt-cred unit
+      ansible.builtin.systemd:
+        daemon_reload: true
+      when: edge_mqtt_bridge_files.changed
+
+    - name: Uninstall mosquitto
+      ansible.builtin.package:
+        name: mosquitto
+        state: absent
+
+    - name: Check for the retired heating-can compose project
+      ansible.builtin.stat:
+        path: /opt/edge-host/heating-can/docker-compose.yml
+      register: edge_heating_can_compose
+
+    - name: Stop and remove the retired heating-can containers and image
+      ansible.builtin.command:
+        cmd: docker compose down --remove-orphans --rmi all
+        chdir: /opt/edge-host/heating-can
+      when: edge_heating_can_compose.stat.exists
+      changed_when: true
+
+    - name: Remove the retired heating-can directory
+      ansible.builtin.file:
+        path: /opt/edge-host/heating-can
+        state: absent
+
+    - name: Remove the can0 networkd configuration
+      ansible.builtin.file:
+        path: /etc/systemd/network/80-can0.network
+        state: absent
+      register: edge_can0_network
+
+    - name: Reload networkd without the can0 configuration
+      ansible.builtin.command:
+        cmd: networkctl reload
+      when: edge_can0_network.changed
+      changed_when: true
+
+    - name: Read the can0 link flags
+      ansible.builtin.command:
+        cmd: ip -o link show can0
+      register: edge_can0_link
+      check_mode: false
+      changed_when: false
+      failed_when: false
+
+    - name: Take can0 down
+      ansible.builtin.command:
+        cmd: ip link set can0 down
+      when:
+        - edge_can0_link.rc == 0
+        - edge_can0_link.stdout is search('[<,]UP[,>]')
+      changed_when: true
+
  roles:
    - certificates
    - common
+    - pacman-cache
    - edge-flash-wear
    - docker-install
    - edge-log-shipper
-    - mqtt-bridge
    - edge-vlan
@@ -1,18 +0,0 @@
---
-# Heating system over the Viessmann E3 CAN bus, for hosts with the Innomaker
-# USB2CAN adapter attached.
-#
-# Targets [heating_can]: membership means the adapter is physically present.
-# Two roles because they are two concerns -- the interface is host network
-# state, the services consume it -- but one group, because both need the same
-# hardware.
-#
-# Requires the base play (plays/install-edge-host.yml) to have run: these
-# services publish to the local MQTT bridge it sets up.
- name: Install heating CAN services
-  hosts: heating_can
-  become: true
-
-  roles:
-    - socketcan
-    - heating-can
@@ -22,6 +22,7 @@
  become: true
  roles:
    - common
+    - timesyncd
    - docker-install
    - netbird-proxy
    - netbird-proxy-watchdog
@@ -16,5 +16,6 @@
  become: true
  roles:
    - common
+    - timesyncd
    - docker-install
    - netbird-server
@@ -54,18 +54,9 @@
 # via plays/configure-ssh-ca.yml.

 # -------------------------------------------------------
-# 5. Disable NTP on VMs/LXC (use host time)
+# 5. Time sync
 # -------------------------------------------------------
- name: Stop and disable systemd-timesyncd on VMs/LXC
-  systemd:
-    name: systemd-timesyncd
-    state: stopped
-    enabled: no
-    masked: yes
-  when:
-    - ansible_facts['virtualization_role'] == 'guest'
-    - ansible_facts['virtualization_type'] in ['kvm', 'lxc']
-  ignore_errors: yes
+# Moved to separate roles: timesyncd (internet VPS), chrony-ntp-server (edge).

 # -------------------------------------------------------
 # 6. Certificates
@@ -7,7 +7,9 @@

 edge_alloy_config_file: /etc/alloy/edge.alloy
 edge_alloy_http_port: 12345
-edge_alloy_bin: /usr/bin/grafana-alloy   # Arch `grafana-alloy` pkg names the binary this, not `alloy`
+# Upstream image: Arch's grafana-alloy 1.21 is built without
+# loki.source.journal. Renovate-tracked (customManagers in renovate.json).
+edge_alloy_image: grafana/alloy:v1.21.3@sha256:8ab871206bd2d8f89277f53abffee5f452a293980788d52f85fa183a87a505a4
 edge_loki_push_url: "https://loki.renner.uno/loki/api/v1/push"
 edge_loki_username: edge-1
 edge_alloy_labels:
@@ -6,15 +6,18 @@
 # directly, so one journal source covers everything. Alloy s storage/WAL sits
 # on /run (tmpfs) so it does not write to flash either.

- name: Install grafana-alloy
+# Alloy runs from the upstream image (see edge-alloy.service); the Arch package
+# lacks journal support.
+- name: Remove the grafana-alloy package
  ansible.builtin.package:
    name: grafana-alloy
-    state: present
+    state: absent

 - name: Create alloy system group
  ansible.builtin.group:
    name: alloy
    system: true
+  register: edge_alloy_group

 - name: Create alloy system user
  ansible.builtin.user:
@@ -24,6 +27,25 @@
    system: true
    create_home: false
    shell: /usr/bin/nologin
+  register: edge_alloy_user
+
+- name: Look up the systemd-journal group
+  ansible.builtin.getent:
+    database: group
+    key: systemd-journal
+
+- name: Set the container identity
+  ansible.builtin.set_fact:
+    edge_alloy_uid: "{{ edge_alloy_user.uid }}"
+    edge_alloy_gid: "{{ edge_alloy_group.gid }}"
+    edge_alloy_journal_gid: "{{ ansible_facts.getent_group['systemd-journal'][1] }}"
+
+- name: Pull the alloy image
+  ansible.builtin.command:
+    argv: [docker, pull, "{{ edge_alloy_image }}"]
+  register: edge_alloy_pull
+  changed_when: "'Downloaded newer image' in edge_alloy_pull.stdout"
+  notify: Restart alloy

 - name: Create alloy config directory
  ansible.builtin.file:
@@ -1,32 +1,35 @@
 [Unit]
-Description=Grafana Alloy (edge-1 log shipper -> Loki)
+Description=Grafana Alloy (journal -> Loki)
 Documentation=https://grafana.com/docs/alloy/
-After=network-online.target
+After=docker.service network-online.target
+Requires=docker.service
 Wants=network-online.target

 [Service]
 Type=simple
-User=alloy
-Group=alloy
-# Read the (volatile) systemd journal.
-SupplementaryGroups=systemd-journal
-# WAL + positions on tmpfs so the agent never writes to the eMMC. %t is the
-# runtime dir root (/run); RuntimeDirectory creates /run/alloy owned by us.
-RuntimeDirectory=alloy
-ExecStart={{ edge_alloy_bin }} run \
+# WAL + positions on tmpfs so the agent never writes to the eMMC.
+ExecStartPre=/usr/bin/install -d -o alloy -g alloy -m 0750 /run/alloy
+ExecStartPre=-/usr/bin/docker rm -f edge-alloy
+# Attached run with --log-driver none: the container's output reaches the
+# journal once, through this unit.
+ExecStart=/usr/bin/docker run --rm --name edge-alloy \
+  --log-driver none \
+  --network host \
+  --user {{ edge_alloy_uid }}:{{ edge_alloy_gid }} \
+  --group-add {{ edge_alloy_journal_gid }} \
+  --read-only --tmpfs /tmp \
+  --cap-drop ALL --security-opt no-new-privileges \
+  -v /run/log/journal:/run/log/journal:ro \
+  -v /etc/machine-id:/etc/machine-id:ro \
+  -v {{ edge_alloy_config_file }}:/etc/alloy/config.alloy:ro \
+  -v /run/alloy:/var/lib/alloy \
+  {{ edge_alloy_image }} run \
  --server.http.listen-addr=127.0.0.1:{{ edge_alloy_http_port }} \
-  --storage.path=%t/alloy \
-  {{ edge_alloy_config_file }}
-ExecReload=/bin/kill -HUP $MAINPID
-Restart=on-failure
+  --storage.path=/var/lib/alloy \
+  /etc/alloy/config.alloy
+ExecStop=/usr/bin/docker stop edge-alloy
+Restart=always
 RestartSec=10s
-LimitNOFILE=65536
-
-# Hardening (bare metal, no LXC namespace limits here).
-NoNewPrivileges=yes
-ProtectSystem=strict
-ProtectHome=yes
-PrivateTmp=yes

 [Install]
 WantedBy=multi-user.target
@@ -1,71 +0,0 @@
---
-# Heating system over the Viessmann E3 CAN bus: open3e (heat pump) and
-# e3oncan (E380 energy meter). The can0 interface itself is the socketcan
-# role.
-
-# Service root. Kept per-role so the role is usable on its own.
-edge_base_dir: /opt/edge-host
-
-edge_open3e_mqtt_user: open3e
-edge_open3e_mqtt_topic: open3e
-edge_open3e_mqtt_format: "{device}_{didNumber:04d}_{didName}"
-edge_open3e_poll_seconds: 30
-# Read-only datapoint set (Phase 1 extended set, established 2026-07-02 on
-# the commissioning workstation; see vican repo CLAUDE.md for the rationale).
-# NO -w / write DIDs here — live heating + battery, writes are Phase 3.
-# vx3.266 = ErrorDtcHistory (O3EList) — the VX3 fault log; polled to catch
-# recurrences of FailureCommunicationEnergyMeter (the E380 energy-meter link
-# the internal PV-surplus EMS depends on). Decodes via the master O3EList
-# codec inherited through the vx3plus overlay.
-# vitocal.543/2350/2543/2560: SmartGrid-/EMS-Status-Beobachtung (2026-07-06)
-# — klärt, ob die Eigenstromoptimierung (EMS) bei PV-Überschuss von selbst
-# den WW-Boost auslöst (2543.2 steht laut Scan bereits auf +10 K), bevor
-# SG-Ready-Verdrahtung oder andere Trigger gebaut werden. Alle vier ro.
-# vitocal.259/260 = InfoDtcList/InfoDtcHistory (O3EList) — the HPMU event log,
-# the Vitocal-side counterpart to vx3.266. Both are capped lists (2 and 9
-# entries when added), so the multi-frame read is cheap at a 30 s poll.
-# Records faults/info events only (NormalOperation, LagDeviceDtcReported,
-# LegionellaProtectionTemperatureReached) — NOT setpoint or program changes.
-# onebase.*: the 29 paired ZigBee slots on the One Base gateway (ECU 0x6c3) --
-# 8 radiator valves, 9 climate sensors, 9 underfloor actuators, 3 floor
-# thermostats. Per-device room temperature, active setpoint, humidity, valve
-# opening/demand, battery and RSSI; the local replacement for the ViCare cloud
-# room sensors. Needs the onebase overlay (files/open3e-onebase.py) -- the stock
-# codec declares 57 bytes and a paired slot answers with 68.
-# Only CurrentValues are polled. The room and device registries (1884.., 2084..)
-# are static configuration and are read on demand, not every 30 s.
-edge_open3e_datapoints: >-
-  vitocal.259,vitocal.260,vitocal.268,vitocal.269,vitocal.271,vitocal.274,vitocal.286,vitocal.288,vitocal.318,vitocal.321,vitocal.324,vitocal.335,vitocal.336,vitocal.396,vitocal.402,vitocal.403,vitocal.476,vitocal.477,vitocal.543,vitocal.548,vitocal.565,vitocal.1007,vitocal.1043,vitocal.1190,vitocal.1211,vitocal.1391,vitocal.1416,vitocal.1417,vitocal.2320,vitocal.2346,vitocal.2350,vitocal.2351,vitocal.2352,vitocal.2369,vitocal.2370,vitocal.2486,vitocal.2487,vitocal.2488,vitocal.2543,vitocal.2560,vitocal.2622,vitocal.2624,vitocal.2625,vitocal.2735,vitocal.3016,vx3.266,vx3.378,vx3.379,vx3.380,vx3.535,vx3.1603,vx3.1664,vx3.1690,vx3.1801,vx3.1802,vx3.1810,vx3.1828,vx3.1830,vx3.1577,vx3.1578,vx3.1579,vx3.1580,vx3.1581,vx3.1582,vx3.1834,vx3.1836,vx3.2214,vx3.2240,vx3.3085,vx3.3086,vx3.3087,vx3.3088,vx3.3089,vx3.3090,vcmu.320,vcmu.322,vcmu.325,vcmu.355,vcmu.389,vcmu.391,vcmu.1772,vcmu.1773,vcmu.1775,vcmu.1776,vcmu.2256,vcmu.2259,vcmu.2333,vcmu.2334,vcmu.2569,vcmu.2571,vitocal.2791,onebase.2086,onebase.2089,onebase.2092,onebase.2095,onebase.2098,onebase.2101,onebase.2104,onebase.2107,onebase.2110,onebase.2113,onebase.2116,onebase.2119,onebase.2122,onebase.2125,onebase.2128,onebase.2131,onebase.2134,onebase.2137,onebase.2140,onebase.2143,onebase.2262,onebase.2265,onebase.2268,onebase.2271,onebase.2274,onebase.2277,onebase.2280,onebase.2283,onebase.2286
-# ECU addresses; -dev selects codec set, tx selects the UDS address.
-# vcmu (refrigerant-circuit controller) has no dedicated codec set —
-# omitting dpList makes open3e fall back to the generic datapoint list,
-# which decodes all polled VCMU DIDs.
-edge_open3e_devices:
-  vitocal: { tx: "0x680", dpList: "vcal" }
-  # dpList als Pfad: Overlay-Datei mit den Batteriemodul-DIDs (siehe
-  # files/open3e-vx3plus.py) — die Stock-vx3-Liste filtert sie sonst weg.
-  vx3: { tx: "0x6a1", dpList: "/config/vx3plus.py" }
-  vcmu: { tx: "0x68c" }
-  # One Base ZigBee gateway. Overlay re-declares the paired ZigBee slots at
-  # their real 68-byte length (see files/open3e-onebase.py).
-  onebase: { tx: "0x6c3", dpList: "/config/onebase.py" }
-
-edge_e3oncan_gap_seconds: 10
-edge_e3oncan_mqtt_format: "{device}_{didNumber:04d}_{didName}"
-
-# Secrets come from inventory/group_vars/edge_host/vault.yml:
-#   edge_open3e_mqtt_password
-
-# The image carrying both readers, built and pinned in CI
-# (ci/images/heating-can/Containerfile). The source pins live in the
-# Containerfile, in the artifact -- not here -- so what is deployed is a tag,
-# and `docker compose up -d` on an unchanged tag is a genuine no-op.
-#
-# Tracked by the weekly update-audit as an ordinary image, which is why this is
-# simpler to keep current than the two git refs it replaced: one publishes no
-# tags at all, the other was pinned to an untagged commit between releases.
-heating_can_image: gitea.renner.uno/gitea_admin/heating-can:latest
-
-# Compose project directory. Separate from the old native layout under
-# {{ edge_base_dir }}/open3e, which this role removes.
-heating_can_base_dir: "{{ edge_base_dir }}/heating-can"
@@ -1,54 +0,0 @@
-# Managed by ansible (roles/heating-can). Datapoint overlay for the One Base
-# ZigBee gateway on ECU 0x6c3 (BACKENDGATEWAY).
-#
-# Upstream declares ZigBee<N>DeviceCurrentValues as 57 bytes. A PAIRED device
-# slot on this gateway answers with 68: the 57 known bytes plus the parent
-# device serial and three trailing bytes. udsoncan reads only the declared
-# length and then treats the next two bytes -- the first half of that serial --
-# as a foreign data identifier, so every paired slot fails to decode with
-# "Server returned values for data identifier 0x.... that was not requested".
-# The bogus identifier differs per device because the serial does.
-#
-# This overlay re-declares the 29 paired slots at 68 bytes, reusing upstream's
-# sub-type list so the per-device-type O3ESwitch (climate sensor / TRV / floor
-# thermostat / actuator, incl. DeviceTemperatureSetpoint) is inherited rather
-# than copied.
-#
-# EMPTY slots answer with 57 and decode against the stock codec, so they are
-# left alone and are not polled. A slot that is later unpaired therefore starts
-# reporting a decode error on its topic instead of a value.
-#
-# Verified on ECU 0x6c3, 2026-09-17: 29 paired slots, all 68 bytes.
-from open3e.Open3Ecodecs import O3EComplexType, RawCodec
-from open3e.Open3Edatapoints import dataIdentifiers as _master
-
-# ZigBee<N>DeviceCurrentValues of the paired slots: devices 1-20 run 2086..2143
-# in steps of 3, devices 21-29 continue at 2262..2286.
-_PAIRED_CURRENT_VALUES = [2086 + 3 * n for n in range(20)] + [
-    2262 + 3 * n for n in range(9)
-]
-
-
-def _with_parent_serial(did):
-    stock = _master["dids"][did]
-    return O3EComplexType(
-        68,
-        stock.id,
-        list(stock.subTypes)
-        + [
-            RawCodec(8, "ParentDeviceSerialnumber"),
-            RawCodec(2, "Unknown_65_66"),
-            RawCodec(1, "Unknown_67"),
-        ],
-        desc=stock.desc,
-        info=stock.info,
-        acc=stock.acc,
-    )
-
-
-dataIdentifiers = {
-    "dids": {
-        **_master["dids"],
-        **{did: _with_parent_serial(did) for did in _PAIRED_CURRENT_VALUES},
-    }
-}
@@ -1,20 +0,0 @@
-# Managed by ansible (roles/heating-can). Datapoint overlay for the VX3:
-# the stock vx3 list acts as a FILTER (DIDs missing from it are popped
-# from the master table, Open3Eclass.py), so the per-battery-module DIDs
-# were never pollable with dpList "vx3". This overlay re-adds them with
-# codec None (= keep the master/general codec, RawCodec hex strings).
-#
-# Module DIDs (verified answering on ECU 0x6a1, 2026-07-03):
-#   1577-1582  ElectricalEnergyStorageModule{One..Six}OperatingData
-#              (139 B: 8x temperature 0.1 °C + 15x cell voltage mV)
-#   3085-3090  ElectricalEnergyStorageModule{One..Six}Information
-#              (18 B: module voltage 0.01 V, SoH?, counters)
-from open3e.Open3EdatapointsVx3 import dataIdentifiers as _vx3
-
-dataIdentifiers = {
-    "dids": {
-        **_vx3["dids"],
-        1577: None, 1578: None, 1579: None, 1580: None, 1581: None, 1582: None,
-        3085: None, 3086: None, 3087: None, 3088: None, 3089: None, 3090: None,
-    }
-}
@@ -1,10 +0,0 @@
---
- name: Reload systemd
-  ansible.builtin.systemd:
-    daemon_reload: true
-
- name: Restart heating-can
-  ansible.builtin.command:
-    cmd: docker compose up -d --force-recreate
-    chdir: "{{ heating_can_base_dir }}"
-  changed_when: true
@@ -1,172 +0,0 @@
---
-# Heating system over the Viessmann E3 CAN bus.
-#
-# Two readers of the same heating installation, supervised inside one container
-# from one image (ci/images/heating-can):
-#   open3e    UDS request/response to the Vitocal heat pump and Vitocharge VX3
-#   e3oncan   passive CANopen listener for the E380 grid energy meter, which
-#             feeds the heat pump's own energy management
-#
-# They coexist because e3oncan issues no bus writes.
-#
-# Nothing is installed here. The image is built in CI with both sources pinned,
-# published to the registry, and this host only pulls and runs it. That is what
-# removes the churn: these were pip-installed into venvs on the node, and pip
-# re-cloned and rebuilt a VCS requirement on every converge -- restarting the
-# heating bridge each time -- which pinning the SHA did not fix.
-#
-# network_mode: host is required, not incidental: SocketCAN interfaces live in
-# the host network namespace, so can0 is only reachable that way. It is also how
-# the local MQTT broker on 127.0.0.1 is reached. CAN_RAW needs no capabilities,
-# so both run unprivileged.
-#
-# The can0 interface itself belongs to the socketcan role; this role consumes it.
-
- name: Create heating-can directory
-  ansible.builtin.file:
-    path: "{{ heating_can_base_dir }}"
-    state: directory
-    mode: "0755"
-
-# --- Migration off the native install ---------------------------------------
-# Must happen before the containers start. Two open3e instances issuing UDS
-# requests on one CAN bus is the failure mode to avoid, so the old units are
-# stopped and masked rather than merely disabled -- masked so a stray
-# `systemctl start` or a leftover dependency cannot bring them back alongside
-# the containers.
- name: Find which native CAN units still exist
-  ansible.builtin.stat:
-    path: "/etc/systemd/system/{{ item }}.service"
-  loop:
-    - open3e
-    - e3oncan
-  register: heating_can_native_units
-
-# Stop and disable BEFORE anything else, and do NOT swallow the result.
-#
-# The first version did stop + disable + mask in one call with
-# failed_when: false, then deleted the unit files. Masking a unit whose file
-# still exists conflicts, so the call failed, failed_when hid it, nothing was
-# stopped -- and the next task deleted the unit files out from under two
-# running processes. systemctl is-enabled then reported "not-found" and looked
-# clean while is-active still said "active".
-#
-# The result on 2026-08-10 was two open3e instances issuing UDS requests on the
-# same CAN bus for nine minutes, fighting over the open3e-edge client ID and
-# kicking each other off the broker.
-#
-# Only units that actually exist are touched, so a fresh host does not need an
-# error swallowed to get through this.
- name: Stop and disable the native CAN services
-  ansible.builtin.systemd:
-    name: "{{ item.item }}"
-    state: stopped
-    enabled: false
-  loop: "{{ heating_can_native_units.results }}"
-  loop_control:
-    label: "{{ item.item }}"
-  when: item.stat.exists
-
-# Masking is deliberately NOT used. It writes a symlink at the same path the
-# next task removes, so the two cancel out -- which is half of how the original
-# failed. With the unit files gone there is nothing left to start.
- name: Remove the native unit files
-  ansible.builtin.file:
-    path: "/etc/systemd/system/{{ item }}.service"
-    state: absent
-  loop:
-    - open3e
-    - e3oncan
-  notify: Reload systemd
-
-# The invariant that actually matters is "no native process is on the CAN bus",
-# and systemd reporting success is not the same claim. Two open3e instances
-# polling one bus is the failure this whole block exists to prevent, so it is
-# asserted directly rather than inferred from the calls above.
- name: Check for surviving native CAN processes
-  ansible.builtin.command:
-    argv: [pgrep, -af, "edge-host/(open3e|e3oncan)"]
-  register: heating_can_survivors
-  check_mode: false
-  changed_when: false
-  failed_when: false
-
- name: Assert no native CAN process survived
-  ansible.builtin.assert:
-    that:
-      - heating_can_survivors.stdout | default('') | length == 0
-    fail_msg: >-
-      A native open3e/e3oncan process is still running after the units were
-      stopped and removed:
-      {{ heating_can_survivors.stdout_lines | default([]) | join('; ') }}.
-      Starting the container now would put two readers on the same CAN bus --
-      two open3e instances issue competing UDS requests and take over each
-      other's MQTT session. Kill the survivors, then re-run.
-    success_msg: No native CAN processes remain; safe to start the container.
-
- name: Remove the native venvs
-  ansible.builtin.file:
-    path: "{{ item }}"
-    state: absent
-  loop:
-    - "{{ edge_base_dir }}/open3e/venv"
-    - "{{ edge_base_dir }}/e3oncan/venv"
-    - "{{ edge_base_dir }}/e3oncan/src"
-    - "{{ edge_base_dir }}/open3e"
-    - "{{ edge_base_dir }}/e3oncan"
-
-# --- Configuration (bind-mounted into the containers) ------------------------
- name: Deploy open3e devices.json
-  ansible.builtin.copy:
-    content: "{{ edge_open3e_devices | to_nice_json }}\n"
-    dest: "{{ heating_can_base_dir }}/devices.json"
-    mode: "0644"
-  notify: Restart heating-can
-
- name: Deploy open3e vx3 datapoint overlay (battery-module DIDs)
-  ansible.builtin.copy:
-    src: open3e-vx3plus.py
-    dest: "{{ heating_can_base_dir }}/vx3plus.py"
-    mode: "0644"
-  notify: Restart heating-can
-
- name: Deploy open3e One Base datapoint overlay (68-byte ZigBee slots)
-  ansible.builtin.copy:
-    src: open3e-onebase.py
-    dest: "{{ heating_can_base_dir }}/onebase.py"
-    mode: "0644"
-  notify: Restart heating-can
-
-# --- Compose project ---------------------------------------------------------
- name: Deploy the broker credential env file
-  ansible.builtin.template:
-    src: heating-can.env.j2
-    dest: "{{ heating_can_base_dir }}/heating-can.env"
-    mode: "0600"
-  notify: Restart heating-can
-
- name: Deploy heating-can compose project
-  ansible.builtin.template:
-    src: docker-compose.yml.j2
-    dest: "{{ heating_can_base_dir }}/docker-compose.yml"
-    mode: "0644"
-  notify: Restart heating-can
-
- name: Pull the heating-can image
-  ansible.builtin.command:
-    cmd: docker compose pull
-    chdir: "{{ heating_can_base_dir }}"
-  changed_when: false
-
-# Unlike the zwave and meter services there is no missing-device tolerance here:
-# can0 is created by the socketcan role from a USB adapter that is part of this
-# host's purpose. If it is absent the heating telemetry is down and the run
-# should say so rather than pass quietly.
- name: Start heating-can services
-  ansible.builtin.command:
-    cmd: docker compose up -d
-    chdir: "{{ heating_can_base_dir }}"
-  register: heating_can_up
-  changed_when: >-
-    'Started' in heating_can_up.stderr or 'Created' in heating_can_up.stderr
-    or 'Started' in heating_can_up.stdout or 'Creating' in heating_can_up.stdout
@@ -1,36 +0,0 @@
-# Managed by ansible (roles/heating-can).
-#
-# One container. Both CAN readers live in the image and are supervised inside
-# it -- this file supplies configuration and nothing else. It does not know
-# open3e's or E3onCAN's command line.
-#
-# network_mode: host is required: SocketCAN interfaces live in the host network
-# namespace, so {{ edge_can_interface }} is only reachable this way, and it is
-# also how the local MQTT broker is reached. CAN_RAW needs no capabilities, so
-# the image runs unprivileged.
-services:
-  heating-can:
-    image: {{ heating_can_image }}
-    container_name: heating-can
-    restart: unless-stopped
-    network_mode: host
-    volumes:
-      - ./devices.json:/config/devices.json:ro
-      - ./vx3plus.py:/config/vx3plus.py:ro
-      - ./onebase.py:/config/onebase.py:ro
-    env_file:
-      # Broker credential, 0600 -- see heating-can.env.j2.
-      - heating-can.env
-    environment:
-      CAN_INTERFACE: "{{ edge_can_interface }}"
-      MQTT_HOST: "{{ edge_mqtt_host }}"
-      MQTT_PORT: "{{ edge_mqtt_port }}"
-      MQTT_TOPIC: "{{ edge_open3e_mqtt_topic }}"
-      MQTT_FORMAT: "{{ edge_open3e_mqtt_format }}"
-      E3ONCAN_MQTT_FORMAT: "{{ edge_e3oncan_mqtt_format }}"
-      OPEN3E_CONFIG: /config/devices.json
-      OPEN3E_CLIENT_ID: open3e-edge
-      OPEN3E_POLL_SECONDS: "{{ edge_open3e_poll_seconds }}"
-      OPEN3E_DATAPOINTS: "{{ edge_open3e_datapoints }}"
-      E3ONCAN_DEVICE: e380
-      E3ONCAN_GAP_SECONDS: "{{ edge_e3oncan_gap_seconds }}"
@@ -1,8 +0,0 @@
-# Managed by ansible (roles/heating-can). 0600 -- carries the broker credential.
-#
-# Kept out of docker-compose.yml, which is 0644: the sibling roles on this host
-# do the same (power-meter-sml renders its config at 0600 while its compose file
-# stays world-readable), and the native unit this replaced used a 0600 env file
-# for exactly this value.
-MQTT_USER={{ edge_open3e_mqtt_user }}
-MQTT_PASSWORD={{ edge_open3e_mqtt_password }}
@@ -1,23 +0,0 @@
---
-# --- MQTT: edge clients (open3e, e3oncan, sml2mqtt) publish to a LOCAL
-# mosquitto on loopback, which bridges to the central cluster broker over TLS
-# (open3e/e3oncan have no native MQTTS). This keeps plaintext on loopback only
-# — off the untrusted IoT VLAN — and buffers telemetry in RAM during cluster
-# blips. The local broker writes nothing to the eMMC (persistence off, logs to
-# the volatile journal). See edge-mqtt-bridge.conf.j2 and README "MQTT bridge".
-# Upstream cluster broker the local bridge connects to (TLS; the public
-# Let's Encrypt cert is validated against the system CA bundle).
-edge_mqtt_cluster_host: mqtt.renner.uno
-edge_mqtt_cluster_tls_port: 8883
-edge_mqtt_bridge_cafile: /etc/ssl/certs/ca-certificates.crt
-
-# --- Bridge credential from mqtt-account-controller (REN-1307) ------------
-# The cluster account the bridge logs in as (register entry in
-# kubernetes/apps/home-assistant/mqtt-accounts.yaml). The controller pushes
-# its password to edge-mqtt-cred and rotates it when the bridge reports
-# "not connected"; there is no copy in ansible-vault.
-edge_mqtt_bridge_account: "{{ inventory_hostname_short }}"
-# HTTPS port of edge-mqtt-cred (esp32 device API, mTLS). Only a client
-# certificate from the MQTT CA with this CN is accepted.
-edge_mqtt_cred_port: 8443
-edge_mqtt_cred_allowed_cn: mqtt-account-controller
@@ -1,141 +0,0 @@
-#!/usr/bin/env python3
-# Managed by ansible (roles/mqtt-bridge). Receives the cluster bridge password
-# from mqtt-account-controller (REN-1307) so no plaintext copy lives in
-# ansible-vault and no play run is needed to rotate it.
-#
-# Speaks the controller's esp32 device API over HTTPS:
-#   GET /api/status   -> {"mqtt": {"connected": bool}}
-#   PUT /api/settings <- {"mqtt": {"user": "...", "pass": "..."}}
-# A client certificate from the MQTT CA with CN mqtt-account-controller is
-# required; nothing else may call it. The server key is generated on this
-# host and never leaves it (the controller pins it on first contact).
-#
-# PUT writes the bridge file (template + credentials), removes the legacy
-# vault-password bridges and restarts the local mosquitto. The password is
-# kept only in that 0640 root:mosquitto file.
-import grp
-import json
-import os
-import socket
-import ssl
-import subprocess
-import sys
-import tempfile
-import threading
-from http.server import BaseHTTPRequestHandler, ThreadingHTTPServer
-
-CONF = json.load(open(sys.argv[1]))
-WRITE = threading.Lock()
-
-
-def connected():
-    try:
-        out = subprocess.run(
-            ["mosquitto_sub", "-h", "127.0.0.1", "-p", str(CONF["local_port"]),
-             "-t", CONF["state_topic"], "-C", "1", "-W", "3"],
-            capture_output=True, text=True, timeout=10).stdout
-    except (OSError, subprocess.TimeoutExpired):
-        return False
-    return out.strip() == "1"
-
-
-def write_bridge(user, password):
-    with open(CONF["template"]) as f:
-        body = f.read()
-    body += f"remote_username {user}\nremote_password {password}\n"
-    d = os.path.dirname(CONF["bridge_file"])
-    fd, tmp = tempfile.mkstemp(dir=d, prefix=".edge-mqtt-cred.")
-    with os.fdopen(fd, "w") as f:
-        f.write(body)
-    os.chown(tmp, 0, grp.getgrnam("mosquitto").gr_gid)
-    os.chmod(tmp, 0o640)
-    os.replace(tmp, CONF["bridge_file"])
-    for legacy in CONF["legacy_files"]:
-        if os.path.exists(legacy):
-            os.remove(legacy)
-    subprocess.run(["systemctl", "restart", "mosquitto"], check=True, timeout=60)
-
-
-def valid(s):
-    # Controller passwords are random URL-safe tokens; anything with
-    # whitespace or a control character would break the config line.
-    return isinstance(s, str) and 0 < len(s) <= 256 and s.isprintable() and not any(c.isspace() for c in s)
-
-
-class Handler(BaseHTTPRequestHandler):
-    def authorized(self):
-        cert = self.connection.getpeercert() or {}
-        cns = [v for rdn in cert.get("subject", ()) for k, v in rdn if k == "commonName"]
-        if cns != [CONF["allowed_cn"]]:
-            self.send_error(403)
-            return False
-        return True
-
-    def reply(self, code, obj=None):
-        data = b"" if obj is None else json.dumps(obj).encode()
-        self.send_response(code)
-        if data:
-            self.send_header("Content-Type", "application/json")
-        self.send_header("Content-Length", str(len(data)))
-        self.end_headers()
-        self.wfile.write(data)
-
-    def do_GET(self):
-        if not self.authorized():
-            return
-        if self.path != "/api/status":
-            return self.send_error(404)
-        self.reply(200, {"mqtt": {"connected": connected()}})
-
-    def do_PUT(self):
-        if not self.authorized():
-            return
-        if self.path != "/api/settings":
-            return self.send_error(404)
-        try:
-            n = int(self.headers.get("Content-Length", "0"))
-            if not 0 < n <= 4096:
-                raise ValueError("body size")
-            m = json.loads(self.rfile.read(n))["mqtt"]
-            user, password = m["user"], m["pass"]
-        except (ValueError, KeyError, TypeError):
-            return self.send_error(400)
-        if user != CONF["user"] or not valid(password):
-            return self.send_error(400)
-        with WRITE:
-            write_bridge(user, password)
-        self.log_message("bridge credentials for %s replaced, mosquitto restarted", user)
-        self.reply(204)
-
-    def log_message(self, fmt, *args):
-        sys.stderr.write("%s %s\n" % (self.address_string(), fmt % args))
-
-
-class Server(ThreadingHTTPServer):
-    address_family = socket.AF_INET6
-
-    def server_bind(self):
-        self.socket.setsockopt(socket.IPPROTO_IPV6, socket.IPV6_V6ONLY, 0)
-        super().server_bind()
-
-    def get_request(self):
-        # The TLS handshake runs in the request thread, with a timeout, so a
-        # stalled peer cannot block the accept loop.
-        sock, addr = self.socket.accept()
-        sock.settimeout(10)
-        return self.ctx.wrap_socket(sock, server_side=True, do_handshake_on_connect=False), addr
-
-
-def main():
-    ctx = ssl.SSLContext(ssl.PROTOCOL_TLS_SERVER)
-    ctx.minimum_version = ssl.TLSVersion.TLSv1_2
-    ctx.load_cert_chain(CONF["cert"], CONF["key"])
-    ctx.load_verify_locations(CONF["ca"])
-    ctx.verify_mode = ssl.CERT_REQUIRED
-    srv = Server(("::", CONF["port"]), Handler)
-    srv.ctx = ctx
-    srv.serve_forever()
-
-
-if __name__ == "__main__":
-    main()
@@ -1,10 +0,0 @@
-----BEGIN CERTIFICATE-----
-MIIBdTCCARygAwIBAgIUN8ne4k4Wif9O83GDyKiBP0Ma7EIwCgYIKoZIzj0EAwIw
-GTEXMBUGA1UEAxMOUmVubmVyIE1RVFQgQ0EwHhcNMjYxMDA2MTUzMDE1WhcNMzYx
-MDAzMTUzMDE1WjAZMRcwFQYDVQQDEw5SZW5uZXIgTVFUVCBDQTBZMBMGByqGSM49
-AgEGCCqGSM49AwEHA0IABOZhZF2JDoyvVg2oIXSbJAuAWDcoG22RxPA4oMKRMA/b
-XzIY566D2k6cVnWqbil9s/q4O2mj+Epo7plBw8NwuOOjQjBAMA4GA1UdDwEB/wQE
-AwICpDAPBgNVHRMBAf8EBTADAQH/MB0GA1UdDgQWBBQcqSDDiLZzhrvqq9f16Y08
-CO7QfzAKBggqhkjOPQQDAgNHADBEAiBFkxd9pXnqIcjReEcOTvCBZ3HxKu2jNQGL
-/le7gunTGgIgZapWAcu4awa+wmZcR/z2luOjD2GhIT15um14Z+sstJk=
-----END CERTIFICATE-----
@@ -1,13 +0,0 @@
---
-# The MQTT clients (zwave-js, sml2mqtt, open3e, e3oncan) reconnect on their
-# own once the local broker is back.
- name: Restart mosquitto
-  ansible.builtin.service:
-    name: mosquitto
-    state: restarted
-
- name: Restart edge-mqtt-cred
-  ansible.builtin.systemd:
-    name: edge-mqtt-cred
-    state: restarted
-    daemon_reload: true
@@ -1,109 +0,0 @@
---
-# Local MQTT bridge broker.
-#
-# Edge clients (open3e, e3oncan, sml2mqtt) publish here over loopback; this
-# broker bridges to the cluster broker over TLS, because those clients have no
-# native MQTTS. Persistence is off and logging goes to stdout so it writes
-# nothing to local flash.
-
- name: Install mosquitto
-  ansible.builtin.package:
-    name: mosquitto
-    state: present
-
- name: Create the bridge directory
-  ansible.builtin.file:
-    path: /etc/mosquitto/bridge.d
-    state: directory
-    owner: root
-    group: mosquitto
-    mode: "0750"
-
- name: Check for the controller-managed bridge file
-  ansible.builtin.stat:
-    path: "/etc/mosquitto/bridge.d/{{ edge_mqtt_bridge_account }}.conf"
-  register: edge_mqtt_bridge_managed
-
-# Until mqtt-account-controller has pushed the first password, keep the
-# vault-password bridges so the cluster never loses edge-1's data. Once the
-# managed file exists, never render them again (edge-mqtt-cred removed them).
- name: Deploy legacy vault-password bridges
-  ansible.builtin.template:
-    src: edge-mqtt-bridge-legacy.conf.j2
-    dest: /etc/mosquitto/bridge.d/legacy.conf
-    owner: root
-    group: mosquitto
-    mode: "0640"   # carries the legacy cluster bridge credentials
-  when: not edge_mqtt_bridge_managed.stat.exists
-  notify: Restart mosquitto
-
- name: Deploy local mosquitto config
-  ansible.builtin.template:
-    src: edge-mqtt-bridge.conf.j2
-    dest: /etc/mosquitto/mosquitto.conf
-    owner: root
-    group: mosquitto
-    mode: "0640"
-  notify: Restart mosquitto
-
- name: Enable local mosquitto bridge
-  ansible.builtin.systemd:
-    name: mosquitto
-    enabled: true
-    state: started
-
-# --- edge-mqtt-cred (REN-1307): receives the bridge password from
-# mqtt-account-controller. edge-1 holds only the public MQTT CA and its own
-# server key, generated here and never copied off the host.
- name: Create edge-mqtt-cred config directory
-  ansible.builtin.file:
-    path: /etc/edge-mqtt-cred
-    state: directory
-    owner: root
-    group: root
-    mode: "0700"
-
- name: Generate edge-mqtt-cred server key and certificate
-  ansible.builtin.command:
-    cmd: >-
-      openssl req -x509 -newkey ec -pkeyopt ec_paramgen_curve:prime256v1
-      -nodes -days 36500 -subj "/CN={{ inventory_hostname }}"
-      -keyout /etc/edge-mqtt-cred/tls.key -out /etc/edge-mqtt-cred/tls.crt
-    creates: /etc/edge-mqtt-cred/tls.key
-  notify: Restart edge-mqtt-cred
-
- name: Deploy edge-mqtt-cred files
-  ansible.builtin.copy:
-    src: "{{ item.src }}"
-    dest: "{{ item.dest }}"
-    owner: root
-    group: root
-    mode: "{{ item.mode }}"
-  loop:
-    - {src: edge-mqtt-cred.py, dest: /usr/local/sbin/edge-mqtt-cred, mode: "0755"}
-    # Public CA of the cluster's MQTT client certificates
-    # (kubernetes/infrastructure/post-crds/mqtt-ca.yaml), valid until 2036-10-03.
-    - {src: mqtt-ca.crt, dest: /etc/edge-mqtt-cred/mqtt-ca.crt, mode: "0644"}
-  notify: Restart edge-mqtt-cred
-
- name: Deploy edge-mqtt-cred config and bridge template
-  ansible.builtin.template:
-    src: "{{ item.src }}"
-    dest: "{{ item.dest }}"
-    owner: root
-    group: root
-    mode: "{{ item.mode }}"
-  loop:
-    - {src: edge-mqtt-cred.json.j2, dest: /etc/edge-mqtt-cred/config.json, mode: "0600"}
-    # Read only on the controller's next push: a change here reaches the
-    # running bridge when the password is next set.
-    - {src: edge-1-bridge.conf.in.j2, dest: /etc/edge-mqtt-cred/bridge.conf.in, mode: "0600"}
-    - {src: edge-mqtt-cred.service.j2, dest: /etc/systemd/system/edge-mqtt-cred.service, mode: "0644"}
-  notify: Restart edge-mqtt-cred
-
- name: Enable edge-mqtt-cred
-  ansible.builtin.systemd:
-    name: edge-mqtt-cred
-    enabled: true
-    state: started
-    daemon_reload: true
@@ -1,21 +0,0 @@
-# Managed by roles/mqtt-bridge (REN-1307). edge-mqtt-cred appends
-# remote_username/remote_password to this and writes the result to
-# /etc/mosquitto/bridge.d/{{ edge_mqtt_bridge_account }}.conf. One bridge for
-# open3e, as the register account `{{ edge_mqtt_bridge_account }}`
-# (ACL readwrite open3e/#). sml2mqtt is retired (SML reader, 2026-09-19).
-connection {{ edge_mqtt_bridge_account }}
-address {{ edge_mqtt_cluster_host }}:{{ edge_mqtt_cluster_tls_port }}
-bridge_cafile {{ edge_mqtt_bridge_cafile }}
-bridge_insecure false
-remote_clientid {{ edge_mqtt_bridge_account | replace('-', '') }}-bridge
-cleansession false
-try_private true
-restart_timeout 5 30
-queue_qos0_messages true
-# The bridge state goes to the LOCAL broker only (retained 1/0); edge-mqtt-cred
-# reads it to answer the controller's "connected?".
-notifications true
-notifications_local_only true
-notification_topic $SYS/broker/connection/{{ edge_mqtt_bridge_account }}/state
-topic open3e/# out 0
-topic open3e/cmnd in 0
@@ -1,21 +0,0 @@
-# Managed by roles/mqtt-bridge. Legacy vault-password bridges, rendered only
-# while /etc/mosquitto/bridge.d/{{ edge_mqtt_bridge_account }}.conf does not
-# exist; edge-mqtt-cred deletes this file on the controller's first push
-# (REN-1307). Remove with the vault keys once edge-1 is on the register account.
-# --- Bridge 1: open3e datapoints + command topic, as the cluster `open3e`
-# user (its ACL is `readwrite open3e/#`, which covers publishing datapoints
-# and subscribing to open3e/cmnd). e3oncan also publishes under open3e/#.
-connection edge1-open3e
-address {{ edge_mqtt_cluster_host }}:{{ edge_mqtt_cluster_tls_port }}
-bridge_cafile {{ edge_mqtt_bridge_cafile }}
-bridge_insecure false
-remote_username {{ edge_open3e_mqtt_user }}
-remote_password {{ edge_open3e_mqtt_password }}
-remote_clientid edge1-bridge-open3e
-cleansession false
-try_private true
-notifications false
-restart_timeout 5 30
-queue_qos0_messages true
-topic open3e/# out 0
-topic open3e/cmnd in 0
@@ -1,30 +0,0 @@
-# Managed by roles/mqtt-bridge. Local mosquitto that the edge clients (open3e,
-# e3oncan, sml2mqtt) publish to over loopback; it bridges to the central
-# cluster broker over TLS. open3e/e3oncan have no native MQTTS, so this is how
-# edge-1's MQTT gets off plaintext on the untrusted IoT VLAN, and it buffers
-# telemetry in RAM if the cluster broker is briefly unreachable.
-#
-# eMMC: this host runs on a small internal eMMC, so the local broker writes
-# NOTHING to flash — `persistence false` keeps retained/queued messages in RAM
-# only, and `log_dest stdout` goes to the (volatile, RAM) journal that Alloy
-# ships to Loki. Do not add persistence/log-file settings here.
-persistence false
-log_dest stdout
-log_type error
-log_type warning
-log_type notice
-
-# Loopback only — the trust boundary is the host itself. Any process on edge-1
-# may publish here (same trust as the bridged services); nothing off-host can
-# reach it. Real authentication to the cluster happens on the bridge below.
-# Single v4-loopback listener: all edge clients dial 127.0.0.1 (edge_mqtt_host),
-# and a second same-port listener can make some builds refuse to start.
-listener 1883 127.0.0.1
-allow_anonymous true
-
-# --- Bridges to the cluster broker (REN-1307). bridge.d holds either
-# {{ edge_mqtt_bridge_account }}.conf, written by edge-mqtt-cred with the password
-# mqtt-account-controller pushed, or, until that first push, legacy.conf with
-# the two vault-password bridges. edge-mqtt-cred deletes legacy.conf when it
-# writes the new file.
-include_dir /etc/mosquitto/bridge.d
@@ -1,13 +0,0 @@
-{{ {
-  "port": edge_mqtt_cred_port,
-  "allowed_cn": edge_mqtt_cred_allowed_cn,
-  "user": edge_mqtt_bridge_account,
-  "cert": "/etc/edge-mqtt-cred/tls.crt",
-  "key": "/etc/edge-mqtt-cred/tls.key",
-  "ca": "/etc/edge-mqtt-cred/mqtt-ca.crt",
-  "template": "/etc/edge-mqtt-cred/bridge.conf.in",
-  "bridge_file": "/etc/mosquitto/bridge.d/" ~ edge_mqtt_bridge_account ~ ".conf",
-  "legacy_files": ["/etc/mosquitto/bridge.d/legacy.conf"],
-  "local_port": edge_mqtt_port,
-  "state_topic": "$SYS/broker/connection/" ~ edge_mqtt_bridge_account ~ "/state",
-} | to_nice_json }}
@@ -1,19 +0,0 @@
-# Managed by roles/mqtt-bridge (REN-1307). See /usr/local/sbin/edge-mqtt-cred.
-[Unit]
-Description=Receives the MQTT bridge credential from mqtt-account-controller
-After=network-online.target mosquitto.service
-Wants=network-online.target
-
-[Service]
-ExecStart=/usr/bin/python3 /usr/local/sbin/edge-mqtt-cred /etc/edge-mqtt-cred/config.json
-Restart=always
-RestartSec=5
-# Root only to write the bridge file and restart mosquitto.
-ProtectSystem=strict
-ReadWritePaths=/etc/mosquitto/bridge.d
-ProtectHome=true
-PrivateTmp=true
-NoNewPrivileges=true
-
-[Install]
-WantedBy=multi-user.target
@@ -0,0 +1,14 @@
+# Managed by ansible (roles/pacman-cache).
+# Downloaded packages are not kept; older versions come from the Arch Linux
+# Archive.
+[Trigger]
+Operation = Install
+Operation = Upgrade
+Operation = Remove
+Type = Package
+Target = *
+
+[Action]
+Description = Removing downloaded packages from the cache...
+When = PostTransaction
+Exec = /usr/bin/find /var/cache/pacman/pkg -mindepth 1 -delete
@@ -0,0 +1,21 @@
+---
+# Keep the pacman package cache empty. pacman keeps every downloaded package;
+# on a 7 GB eMMC root the cache grows to gigabytes. Arch hosts only.
+
+- name: Ensure the pacman hook directory exists
+  ansible.builtin.file:
+    path: /etc/pacman.d/hooks
+    state: directory
+    mode: "0755"
+
+- name: Empty the package cache after every transaction
+  ansible.builtin.copy:
+    src: pacman-cache.hook
+    dest: /etc/pacman.d/hooks/pacman-cache.hook
+    mode: "0644"
+
+- name: Empty the package cache
+  ansible.builtin.command:
+    argv: [find, /var/cache/pacman/pkg, -mindepth, "1", -delete, -print]
+  register: pacman_cache_clean
+  changed_when: pacman_cache_clean.stdout | length > 0
@@ -1,5 +0,0 @@
---
-# SocketCAN interface. Consumed by heating-can.
-# --- CAN / open3e (Viessmann E3 external bus) ---
-edge_can_interface: can0
-edge_can_bitrate: 250000
@@ -1,7 +0,0 @@
---
-# reload alone only re-reads config files; existing links keep their old state
-# until reconfigured.
- name: Reload networkd
-  ansible.builtin.shell:
-    cmd: networkctl reload && networkctl reconfigure {{ edge_can_interface }}
-  changed_when: true
@@ -1,20 +0,0 @@
---
-# SocketCAN interface, owned by systemd-networkd.
-#
-# gs_usb is an in-tree module and autoloads when the adapter enumerates;
-# networkd then matches the interface and applies bitrate + up. Separate from
-# the services that consume the bus (heating-can, e380-can-meter) because the
-# interface is host network state shared by both.
-
- name: Configure can0 via systemd-networkd
-  ansible.builtin.template:
-    src: 80-can0.network.j2
-    dest: /etc/systemd/network/80-can0.network
-    mode: "0644"
-  notify: Reload networkd
-
- name: Enable systemd-networkd
-  ansible.builtin.service:
-    name: systemd-networkd
-    state: started
-    enabled: true
@@ -1,17 +0,0 @@
-# Managed by ansible (roles/socketcan).
-# Viessmann E3 external CAN bus via Innomaker USB2CAN (gs_usb).
-# The adapter is a stub tap on an already-terminated bus (120R jumper OFF).
-[Match]
-Name={{ edge_can_interface }}
-
-[Link]
-# networkd applies [CAN] settings but does not raise a CAN link on its
-# own (observed on edge-1); force it up, and back up after any down.
-ActivationPolicy=always-up
-
-[CAN]
-BitRate={{ edge_can_bitrate }}
-# NO RestartSec here: gs_usb does not support hardware bus-off restart,
-# and networkd fails the ENTIRE link configuration on the unsupported
-# option ("off (failed)", link never raised — found by reboot test).
-# Bus-off recovery falls to the open3e service restart loop.
@@ -0,0 +1,26 @@
+---
+# Keep the system clock on NTP with systemd-timesyncd, on hosts that run no
+# chrony. A KVM guest's clocksource does not steer wall-clock time; without an
+# NTP client the clock drifts until JWT iat/exp checks fail.
+
+- name: Install systemd-timesyncd
+  ansible.builtin.apt:
+    name: systemd-timesyncd
+    state: present
+  when: ansible_facts['os_family'] == 'Debian'
+
+- name: Run systemd-timesyncd
+  ansible.builtin.systemd_service:
+    name: systemd-timesyncd
+    masked: false
+    enabled: true
+    state: started
+
+- name: Wait for the clock to synchronize
+  ansible.builtin.command:
+    argv: [timedatectl, show, --property=NTPSynchronized, --value]
+  register: timesyncd_synchronized
+  changed_when: false
+  until: timesyncd_synchronized.stdout == "yes"
+  retries: 12
+  delay: 5
@@ -12,8 +12,6 @@
  ansible.builtin.import_playbook: plays/configure-synology-python.yml
 - name: Base system
  ansible.builtin.import_playbook: plays/common.yml
- name: VM time sync
-  ansible.builtin.import_playbook: plays/configure-vm-time-sync.yml

 - name: SSH user CA
  ansible.builtin.import_playbook: plays/configure-ssh-ca.yml
@@ -33,8 +31,6 @@
  ansible.builtin.import_playbook: plays/install-edge-host.yml
 - name: Z-Wave gateway
  ansible.builtin.import_playbook: plays/install-zwave-gateway.yml
- name: Heating CAN
-  ansible.builtin.import_playbook: plays/install-heating-can.yml
 - name: NTP service
  ansible.builtin.import_playbook: plays/install-ntp-ha.yml

@@ -19,7 +19,7 @@ The image is the official archiso **releng** profile plus:
 - the extra disk tools the installer needs

 Division of labour: the ISO produces an **ansible-ready base system**;
-all service configuration (zwave-js-ui, sml2mqtt, open3e/CAN) stays in
+all service configuration (zwave-js-ui, sml2mqtt) stays in
 `ansible/docs/edge-host.md` as the single source of truth. Rebuilding the
 box is: boot ISO → `edge-install` → run the play.

@@ -44,7 +44,7 @@ spec:
      annotations:
        # Bump to restart the pod and re-attach net1 (DHCP via multus).
        # 2026-10-06: first attach on containernetworking/plugins v1.9.1.
-        homelab.renner.uno/restarted-for: "2026-10-06 cni-plugins v1.9.1 attach check"
+        homelab.renner.uno/restarted-for: "2026-11-07 net1 without RA (S28-36)"
        k8s.v1.cni.cncf.io/networks: mdns-relay-iot
    spec:
      # Runs where the node patch declares the IoT VLAN (ens19).
@@ -31,6 +31,11 @@ spec:
  # dropped. The relay's forward path to Home Assistant runs over eth0, so
  # that route has to stay intact.
  #
+  # sbr covers IPv4 only. With Router Advertisements net1 gets a global IPv6
+  # address and default route in the main table, and the IPv6 forward to the
+  # Service leaves via net1 with an IoT source, which HA's CNP drops. tuning
+  # turns RA processing off; the link-local address ff02::fb needs stays.
+  #
  # Requires the cni-dhcp-daemon DaemonSet in infrastructure/multus.
  config: |
    {
@@ -45,6 +50,13 @@ spec:
            "type": "dhcp"
          }
        },
+        {
+          "type": "tuning",
+          "sysctl": {
+            "net.ipv6.conf.IFNAME.accept_ra": "0",
+            "net.ipv6.conf.IFNAME.autoconf": "0"
+          }
+        },
        {
          "type": "sbr"
        }
@@ -64,7 +64,7 @@ spec:
          type: RuntimeDefault
      containers:
        - name: shelly-manager
-          image: gitea.renner.uno/konairius/shelly-manager:2026-11-05-0732 # {"$imagepolicy": "flux-system:shelly-manager"}
+          image: gitea.renner.uno/konairius/shelly-manager:2026-11-07-1918 # {"$imagepolicy": "flux-system:shelly-manager"}
          imagePullPolicy: IfNotPresent
          ports:
            - name: http
@@ -49,22 +49,12 @@
  auth: cert
  deliver: {namespace: home-assistant}
  acl: ["readwrite #"]
-# edge-1's local mosquitto bridge (REN-1307): one bridge for open3e/e3oncan.
-# The controller pushes
-# the password to edge-mqtt-cred on edge-1 (ansible role mqtt-bridge) over
-# HTTPS with its own client certificate, and pins edge-1's self-generated
-# server certificate on first contact (key edge-1.pin in mqtt-account-hashes;
-# delete it after a reinstall of edge-1).
- name: edge-1
+# vitocal-can: open3e-esp32 CAN gateway at the Vitocal 250-A (S28-28).
+# The firmware registers its compiled-in DHCP name `open3e`, not its
+# configured hostname.
+- name: vitocal-can
  auth: password
-  deliver: {esp32: "https://edge-1.iot.renner.uno:8443"}
-  # No sml2mqtt/#: the SML meter reader is retired for good (owner,
-  # 2026-09-19; grid data comes from the E380 on the CAN bus).
-  acl: ["readwrite open3e/#"]
-# edge-2's local mosquitto bridge, same role and pinning as edge-1.
- name: edge-2
-  auth: password
-  deliver: {esp32: "https://edge-2.iot.renner.uno:8443"}
+  deliver: {esp32: "http://open3e.iot.renner.uno"}
  acl: ["readwrite open3e/#"]
 # Shellies (REN-1017): one password account per device, pushed by the
 # controller through shelly-manager's per-device API. Name shelly-<id> =
@@ -111,6 +101,10 @@
  auth: password
  deliver: {shelly-manager: 25}  # Plug S Gen1 1c1a8f
  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-41
+  auth: password
+  deliver: {shelly-manager: 41}  # Plug Gen1 f4cfa26d9cb2
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
 - name: shelly-15
  auth: password
  deliver: {shelly-manager: 15}  # Plug S G3 8cbfea910578
@@ -193,6 +187,34 @@
  auth: password
  deliver: {shelly-manager: 30}  # Plus 2PM b48a0a226c28 (reachable again, REN-1108)
  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-7
+  auth: password
+  deliver: {shelly-manager: 7}  # Plus 1PM Mini 348518df3500
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-23
+  auth: password
+  deliver: {shelly-manager: 23}  # Plus 1PM Mini 348518e05b88
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-11
+  auth: password
+  deliver: {shelly-manager: 11}  # Plus 2PM ccdba7d0b804
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-28
+  auth: password
+  deliver: {shelly-manager: 28}  # Plus 2PM 0cdc7efa8dc0
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-17
+  auth: password
+  deliver: {shelly-manager: 17}  # Plus Plug S d4d4daed2054
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-18
+  auth: password
+  deliver: {shelly-manager: 18}  # Plus Plug S d4d4daecc47c
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-20
+  auth: password
+  deliver: {shelly-manager: 20}  # Plus Plug S d4d4daecb690
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
 # Sleeping H&Ts (REN-1107): awake only 8-13 s every 1-2 h, so the
 # controller pushes when the device publishes `online` on its wake topic
 # (shelly-manager topic prefix `shellies/<hostname>`), not in the 2-min loop.
@@ -216,3 +238,8 @@
  deliver: {shelly-manager: 38}  # H&T G3 ecda3bc0b6a0
  wake: shellies/shellyhtg3-ecda3bc0b6a0/online
  acl: ["readwrite shellies/#", "write homeassistant/#"]
+- name: shelly-40
+  auth: password
+  deliver: {shelly-manager: 40}  # Flood G4 7c2c67732e08
+  wake: shellies/shellyfloodg4-7c2c67732e08/online
+  acl: ["readwrite shellies/#", "write homeassistant/#"]
@@ -156,13 +156,39 @@ spec:
    k8sServicePort: 7445
    # Hubble itself is on in every agent (chart default); the relay aggregates
    # the three nodes' flow buffers behind one gRPC endpoint so `hubble observe`
-    # works without exec into kube-system (REN-487). Renders no change to
-    # cilium-config or the agent DaemonSet, so the reloader annotation above
-    # does not roll the CNI. The relay has no client auth; who may reach it is
-    # network-policies/kube-system-hubble-relay.yaml.
+    # works without exec into kube-system (REN-487). The relay has no client
+    # auth; who may reach it is network-policies/kube-system-hubble-relay.yaml.
    hubble:
      relay:
        enabled: true
+      # Every policy drop goes to the agent's stdout and from there to Loki
+      # ({namespace="kube-system", container="cilium-agent"} |= "POLICY_DENIED"),
+      # so denied traffic can be reviewed after the fact. Changes cilium-config,
+      # so the reloader rolls the agents.
+      export:
+        static:
+          enabled: true
+          filePath: stdout
+          allowList:
+            - '{"verdict":["DROPPED"],"drop_reason_desc":["POLICY_DENIED"],"event_type":[{"type":1}]}'
+          fieldMask:
+            - time
+            - node_name
+            - verdict
+            - drop_reason_desc
+            - traffic_direction
+            - IP
+            - l4
+            - source.namespace
+            - source.pod_name
+            - source.identity
+            - source.workloads
+            - source_names
+            - destination.namespace
+            - destination.pod_name
+            - destination.identity
+            - destination.workloads
+            - destination_names
    l2announcements:
      enabled: true
    externalIPs:
@@ -0,0 +1,150 @@
+# Client networks as Cilium CIDR groups, referenced from CNPs via
+# fromCIDRSet.cidrGroupRef. ULA + IPv4 only: the ISP-delegated GUA prefixes
+# change and are not listed.
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-default
+spec:
+  externalCIDRs:
+    - fd00::/64
+    - 192.168.8.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-management
+spec:
+  externalCIDRs:
+    - fd02:10::/64
+    - 10.2.10.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-radius
+spec:
+  externalCIDRs:
+    - fd02:11::/64
+    - 10.2.11.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-video
+spec:
+  externalCIDRs:
+    - 10.2.20.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-iot
+spec:
+  externalCIDRs:
+    - fd02:30::/64
+    - 10.2.30.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-server
+spec:
+  externalCIDRs:
+    - fd02:40::/64
+    - fd40::/64
+    - 10.2.40.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-k8s-node
+spec:
+  externalCIDRs:
+    - fd02:46::/64
+    - 10.2.46.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-k8s-ingress
+spec:
+  externalCIDRs:
+    - fd02:47::/64
+    - 10.2.47.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-k8s-pod
+spec:
+  externalCIDRs:
+    - fd02:48::/64
+    - 10.2.48.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-privat
+spec:
+  externalCIDRs:
+    - fd02:50::/64
+    - 10.2.50.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-phone
+spec:
+  externalCIDRs:
+    - 10.2.60.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-access
+spec:
+  externalCIDRs:
+    - 10.2.70.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-vpn
+spec:
+  externalCIDRs:
+    - 10.2.80.0/24
+    - 192.168.32.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-guest
+spec:
+  externalCIDRs:
+    - 10.2.90.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-multi-transfer
+spec:
+  externalCIDRs:
+    - 10.2.122.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-multi-lan
+spec:
+  externalCIDRs:
+    - 10.2.123.0/24
+---
+apiVersion: cilium.io/v2
+kind: CiliumCIDRGroup
+metadata:
+  name: net-mutti
+spec:
+  externalCIDRs:
+    - 10.2.200.0/24
@@ -186,14 +186,21 @@ spec:
    matchLabels:
      app.kubernetes.io/name: mosquitto
  ingress:
-    - fromEntities:
-        - world
+    - fromCIDRSet:
+        - cidrGroupRef: net-iot
      toPorts:
        - ports:
            - port: "1883"
              protocol: TCP
            - port: "8883"
              protocol: TCP
+    # MQTT clients on the private LAN, TLS only.
+    - fromCIDRSet:
+        - cidrGroupRef: net-privat
+      toPorts:
+        - ports:
+            - port: "8883"
+              protocol: TCP
 ---
 apiVersion: cilium.io/v2
 kind: CiliumNetworkPolicy
@@ -205,8 +212,11 @@ spec:
    matchLabels:
      app.kubernetes.io/name: home-assistant
  ingress:
-    - fromEntities:
-        - world
+    - fromCIDRSet:
+        - cidrGroupRef: net-privat
+        - cidrGroupRef: net-vpn
+        - cidrGroupRef: net-iot
+        - cidrGroupRef: net-server
      toPorts:
        - ports:
            - port: "8123"
@@ -225,8 +235,8 @@ spec:
    matchLabels:
      app.kubernetes.io/name: shelly-manager
  ingress:
-    - fromEntities:
-        - world
+    - fromCIDRSet:
+        - cidrGroupRef: net-iot
      toPorts:
        - ports:
            - port: "8082"
@@ -489,7 +499,7 @@ spec:
            - port: "6638"
              protocol: TCP
 ---
-# mqtt-account-controller: credential delivery to edge-1 (deliver.esp32 in mqtt-accounts.yaml).
+# mqtt-account-controller: credential delivery to deliver.esp32 targets in mqtt-accounts.yaml.
 apiVersion: cilium.io/v2
 kind: CiliumNetworkPolicy
 metadata:
@@ -514,12 +524,12 @@ spec:
          rules:
            dns:
              - matchPattern: "*"
+    # vitocal-can (open3e-esp32), plain HTTP API.
    - toFQDNs:
-        - matchName: "edge-1.iot.renner.uno"
-        - matchName: "edge-2.iot.renner.uno"
+        - matchName: "open3e.iot.renner.uno"
      toPorts:
        - ports:
-            - port: "8443"
+            - port: "80"
              protocol: TCP
 ---
 # whisper and speech-to-phrase: model downloads over HTTPS.
@@ -0,0 +1,40 @@
+# CoreDNS is reachable from the LAN through the kube-dns-lb LoadBalancer
+# (ETP=Local, client address reaches the pod). Selecting the pods makes
+# them default-deny for ingress, so the whole cluster (pods, nodes, kubelet
+# probes, Prometheus) is allowed on every port; LAN clients only on 53.
+apiVersion: cilium.io/v2
+kind: CiliumNetworkPolicy
+metadata:
+  name: coredns-ingress
+  namespace: kube-system
+spec:
+  endpointSelector:
+    matchLabels:
+      k8s-app: kube-dns
+  ingress:
+    - fromEntities:
+        - cluster
+    - fromCIDRSet:
+        - cidrGroupRef: net-default
+        - cidrGroupRef: net-management
+        - cidrGroupRef: net-radius
+        - cidrGroupRef: net-video
+        - cidrGroupRef: net-iot
+        - cidrGroupRef: net-server
+        - cidrGroupRef: net-k8s-node
+        - cidrGroupRef: net-k8s-ingress
+        - cidrGroupRef: net-k8s-pod
+        - cidrGroupRef: net-privat
+        - cidrGroupRef: net-phone
+        - cidrGroupRef: net-access
+        - cidrGroupRef: net-vpn
+        - cidrGroupRef: net-guest
+        - cidrGroupRef: net-multi-transfer
+        - cidrGroupRef: net-multi-lan
+        - cidrGroupRef: net-mutti
+      toPorts:
+        - ports:
+            - port: "53"
+              protocol: UDP
+            - port: "53"
+              protocol: TCP
@@ -1,6 +1,7 @@
 apiVersion: kustomize.config.k8s.io/v1beta1
 kind: Kustomization
 resources:
+  - cidr-groups.yaml
  - default-deny.yaml
  - allow-ingress.yaml
  - ingress-isolation.yaml
@@ -40,3 +41,4 @@ resources:
  - allow-cilium-health.yaml
  - cnpg-barman-s3.yaml
  - kube-system-hubble-relay.yaml
+  - kube-system-coredns.yaml
@@ -1,13 +1,6 @@
-# Targeted carve-out: alloy-syslog needs world ingress on the syslog
-# ports specifically. The Service is ETP=Cluster, so external syslog
-# senders (Proxmox, LXC hosts, network gear) hit the LB IP, get DNAT'd
-# to an alloy pod, and get SNAT'd to the receiving node's cilium_host
-# address. Cilium then sees the source as `world-ipv4` identity (the
-# cilium_host IP isn't a known endpoint), NOT `host` — so the broad
-# monitoring CNP's `fromEntities: host` rule doesn't catch it.
-#
-# Scoped via endpointSelector so this only widens ingress on the
-# alloy-syslog pod, not the whole namespace.
+# Syslog senders reaching the alloy-syslog LB (ETP=Local, client address
+# reaches the pod): network gear on Management, the SLZB coordinators on
+# IoT, and the UDM itself, which sources from its k8s-ingress address.
 apiVersion: cilium.io/v2
 kind: CiliumNetworkPolicy
 metadata:
@@ -19,8 +12,10 @@ spec:
      app.kubernetes.io/instance: alloy-syslog
      app.kubernetes.io/name: alloy
  ingress:
-    - fromEntities:
-        - world
+    - fromCIDRSet:
+        - cidrGroupRef: net-management
+        - cidrGroupRef: net-iot
+        - cidrGroupRef: net-k8s-ingress
      toPorts:
        - ports:
            - port: "514"
@@ -112,7 +112,7 @@ spec:
            - { type: 136, family: IPv6 }
            - { type: 143, family: IPv6 }
 ---
-# Allow FTP access (from scanners on the LAN) to the ftp-scanner pod.
+# FTP from the scanners (IoT and Privat) to the ftp-scanner pod.
 apiVersion: cilium.io/v2
 kind: CiliumNetworkPolicy
 metadata:
@@ -123,8 +123,24 @@ spec:
    matchLabels:
      app.kubernetes.io/name: ftp-scanner
  ingress:
+    - fromCIDRSet:
+        - cidrGroupRef: net-iot
+        - cidrGroupRef: net-privat
+      toPorts:
+        - ports:
+            - port: "21"
+              protocol: TCP
+            - port: "21100"
+              protocol: TCP
+            - port: "21101"
+              protocol: TCP
+            - port: "21102"
+              protocol: TCP
+            - port: "21103"
+              protocol: TCP
+            - port: "21104"
+              protocol: TCP
    - fromEntities:
-        - world
        - host
        - remote-node
      toPorts:
@@ -142,7 +158,7 @@ spec:
            - port: "21104"
              protocol: TCP
 ---
-# Allow Syncthing peer-to-peer sync from the LAN/world.
+# Allow Syncthing peer-to-peer sync from Privat and VPN.
 # - 22000 TCP+QUIC: actual sync traffic between peers.
 # - 21027 UDP: local-discovery broadcast packets from peers on the LAN.
 # UI (8384) is intentionally NOT listed — authentik-gate-sync generates the
@@ -157,8 +173,18 @@ spec:
    matchLabels:
      app.kubernetes.io/name: syncthing
  ingress:
+    - fromCIDRSet:
+        - cidrGroupRef: net-privat
+        - cidrGroupRef: net-vpn
+      toPorts:
+        - ports:
+            - port: "22000"
+              protocol: TCP
+            - port: "22000"
+              protocol: UDP
+            - port: "21027"
+              protocol: UDP
    - fromEntities:
-        - world
        - host
        - remote-node
      toPorts:
@@ -62,9 +62,10 @@ spec:
 # CA, so this bypasses Traefik entirely and the namespace default-deny has
 # to be opened for it — same shape as paperless's allow-ftp-scanner.
 #
-# Scoped to the terminus pods and port 2345 only. Requests still have to
-# carry a known device MAC in the `ID` header plus its api_key; this rule
-# opens the port, not the application.
+# Scoped to the terminus pods, port 2345 and the IoT network (the panel's
+# network; the LB is ETP=Local, so the client address reaches the pod).
+# Requests still have to carry a known device MAC in the `ID` header plus
+# its api_key; this rule opens the port, not the application.
 apiVersion: cilium.io/v2
 kind: CiliumNetworkPolicy
 metadata:
@@ -75,8 +76,13 @@ spec:
    matchLabels:
      app.kubernetes.io/name: terminus
  ingress:
+    - fromCIDRSet:
+        - cidrGroupRef: net-iot
+      toPorts:
+        - ports:
+            - port: "2345"
+              protocol: TCP
    - fromEntities:
-        - world
        - host
        - remote-node
      toPorts:
@@ -154,6 +160,12 @@ spec:
 ---
 # In-cluster + DNS for every pod except terminus (terminus-egress is its
 # allowlist; selecting it here would widen it to all of `cluster`).
+#
+# trmnl-renderer's Chromium calls clients2.google.com:80,
+# update.googleapis.com:443 and accounts.google.com:443; these drops are
+# expected and harmless. The launch flags are fixed in upstream
+# trmnl-ha/ha-trmnl/screenshot.ts (PUPPETEER_ARGS, no override) and lack
+# --disable-background-networking.
 apiVersion: cilium.io/v2
 kind: CiliumNetworkPolicy
 metadata:
@@ -68,13 +68,14 @@ locals {
  # idx is a static per-network slot for rule_index derivation — never
  # reuse a freed idx for a new network.
  #
-  # Deliberately absent: (40) Server idx=4, (42) Ingress idx=5, and
-  # (49) k8s Ceph idx=6. The cluster nodes have interfaces on those VLANs,
-  # so a DNATed flow's reply would go directly over the shared L2 and
-  # bypass the UDM's conntrack (asymmetric, connection drops) — and
-  # clients there are the nodes themselves, whose DNS chain (CoreDNS ->
-  # k8s_gateway) already resolves the public names in-cluster. Their idx
-  # slots stay reserved.
+  # Deliberately absent: (40) Server idx=4, (49) k8s Ceph idx=6,
+  # (46) k8s Node, (47) k8s Ingress and (48) k8s Pod. The cluster nodes
+  # have interfaces on those VLANs (mgmt0, node0, ingress0, pod0), so a
+  # DNATed flow's reply would go directly over the shared L2 and bypass
+  # the UDM's conntrack (asymmetric, connection drops) — and clients there
+  # are the nodes themselves, whose DNS chain (CoreDNS -> k8s_gateway)
+  # already resolves the public names in-cluster. idx=5 stays reserved
+  # (its network, (42) Ingress, no longer exists).
  hairpin_networks = {
    "Default"              = { id = "5d4fba77ce63ee614841d53d", idx = 0 }
    "(10) Management"      = { id = "600334abf9ee0c059da6be8f", idx = 1 }